Neuro Vision STCam Regulatory Compliance
Compliance status of the Neuro Vision STCam module.
The Neuro Vision STCam module contains no intentional radio transmitter. Its compliance provisions are those of the Neuro N6 board it attaches to.
Radio
None. The module has no WiFi or Bluetooth hardware. Firmware selecting a WiFi transport on this module falls back to USB with a console warning.
Electromagnetic compatibility
The module is assessed with the Neuro N6 under test reference OHM-EMC-N6-WC-001. The VD66GY's CSI-2 link runs at a fixed 804 Mbps per lane in every mode, which is the module's highest speed digital signal. Results are published on completion of the assessment.
Laser safety
The VL53L1CB time of flight sensor contains a 940 nm vertical cavity surface emitting laser. STMicroelectronics classifies the VL53L1CB as a Class 1 laser device under IEC 60825-1:2014 when operated as specified, meaning it is safe under all conditions of normal use. The sensor is used within its specified timing and power configuration by the bundled library.
Environmental and disposal
The module is RoHS compliant in component selection and is disposed of through electronic equipment recycling.
Markings
CE and UKCA marking follows completion of the assessment of the Neuro N6 platform. See the Neuro N6 compliance page.