Hardware/Neuro Vision OV5640
Neuro Vision OV5640 Downloads
Software and design files for the Neuro Vision OV5640 module and its carrier.
| Item | Format | Location | Status |
|---|---|---|---|
| Neuro Vision OV5640 schematic, Rev B | PDF, one sheet | Neuro-Vision-OV5640-Schematic-Rev-B.pdf | Current. CERN-OHL-S v2 |
| Neuro Vision OV5640-W schematic, Rev B | PDF, two sheets: camera and sensors, connectivity | Neuro-Vision-OV5640-W-Schematic-Rev-B.pdf | Current. CERN-OHL-S v2 |
| OV5640 driver library | Part of the Arduino core, libraries/OV5640 | stm32n6 | Current |
| VL53L1CB time of flight library | Part of the Arduino core, libraries/VL53L1CB | stm32n6 | Current |
| MayaW476 WiFi library and module firmware (OV5640-W) | Part of the Arduino core, libraries/MayaW476 | stm32n6 | Current |
| Carrier mechanical drawing | PDF, STEP | To be published | In preparation |
| OV5640 datasheet | OmniVision, under NDA | Not redistributed | |
| MAYA-W476 datasheet | u-blox | Vendor site |
Part numbers
Neuro Vision OV5640 is OL-DEV-N6-002 at hardware revision B. Neuro Vision OV5640-W is OL-DEV-N6-003 at hardware revision B. The revision printed on the PCB is matched to the schematic filename before use.
Notes
The OV5640 autofocus coprocessor firmware, ov5640_af_firmware.h in the driver library, is an OmniVision binary. Its redistribution terms are recorded as unconfirmed in the core's third-party notice.
The MAYA-W476 module firmware, sduartspi_iw610.bin.se, applies to the OV5640-W only. It is NXP proprietary, distributed in the library under NXP's licence agreement, and flashed to the board's external flash by the Arduino uploader.