Hardware/Neuro Vision STCam
Neuro Vision STCam Downloads
Software and design files for the Neuro Vision STCam module.
| Item | Format | Location | Status |
|---|---|---|---|
| Neuro Vision ST Cam schematic, Rev B | PDF, one sheet | Neuro-Vision-ST-Cam-Schematic-Rev-B.pdf | Current. CERN-OHL-S v2 |
| VD66GY driver and ISP middleware | Part of the Arduino core, libraries/VD66GY | stm32n6 | Current |
| VL53L1CB time of flight library | Part of the Arduino core, libraries/VL53L1CB | stm32n6 | Current |
| Module mechanical drawing | PDF, STEP | To be published | In preparation |
| VD66GY datasheet | STMicroelectronics | Vendor site | |
| VL53L1CB datasheet | STMicroelectronics | Vendor site |
Part number
Neuro Vision ST Cam is OL-DEV-N6-004 at hardware revision B.
Notes
The VD66GY driver and the software image signal processor are ST's, vendored under libraries/VD66GY/extras/st-driver. ST's original layout is retained alongside the flattened copy the build compiles. Two sensor firmware patch blobs uploaded at start are ST's and cannot be regenerated.
The ISP tuning table in use is ST's for the STEVAL-66GYMAI1 module optics. Adapting it to other optics requires ST's IQTune tool.